| After-sales Service: | Life Time Parts Support, Technical Support |
|---|---|
| Warranty: | 12 Months |
| Transmission Type: | Automatic |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 1. Optimize power matching, lower fuel consumption, optional with DEUTZ series engine.
2. Large capacity battery is adopted to significantly improve the starting performance in winter.
3. Special power for engineering vehicle, articulated frame, hydraulic steering.
4. Wide base tire for 4-wheel drive engineering vehicle.
5. Optimization and upgrading of electrical system in the design of turn over of combined control instrument panel.
6. Adopt high-level waterproof and dustproof plug-in guarantee system, more safe and reliable.
7. The whole machine design meets the requirements of national mandatory noise and safety standards.
| MAIN SPECIFICATIONS OF FCY20/FCY20R/FCY20S Model | ||
| Performance | Rated Loading Weight | 2000KG |
| Bucket capacity | 1. 2m3 | |
| Wheel base | 1280mm | |
| Thread | 1500mm | |
| Gradeability | 21 | |
| Overall dimensions | 3017x1900x2465mm | |
| Mini turning radicus | 4000mm | |
| Walking speed | Forward gear 1 | 6.5km/h |
| Forward gear II | 11km/h | |
| Forward gear III | 24km/h | |
| Backward gear | 4.5km/h | |
| Engine | Engine model | CHANGCHAI390 |
| Engine type | 3 cylinders | |
| Cooler type | water | |
| Stroke | 4 stroke | |
| Rated power | 20KW/2200RPM | |
| Tyre | Tyre size | 825-16 |
| MAIN SPECIFICATIONS OF FCY30/FCY30R/FCY30S | ||
| Performance | Bucket capacity | 1.5 m³ |
| Rated load capacity | 3000 kg | |
| Machine operating weight | 2350 kg | |
| Largest traction | 45 KN | |
| Wheelbase | 1430 mm | |
| Engine | Model | Quanchai 490 |
| Type | In-line, vertical, water-cooled, four-cylinder engine | |
| Rated power | 38 KW | |
| Maximum torque | 270(N.M) | |
| Transmission system | Clutch | Dry friction |
| Gear | Three forward gears and two reverse gears | |
| Maximum speed | 24 km/hr | |
| Type | Fully hydraulic hinged frame, load sensing | |
| Steering system | Steering angle (left and right) | 30° to the left and right |
| Working hydraulic system pressure | 160(kgf/c m²) | |
| Control method | Mechanical | |
| Tyre | Specification | 20.5/70-16 |
| Oil capacity | Fuel tank capacity | 60L |
| Hydraulic system capacity | 60L | |
| MAIN SPECIFICATIONS OF FCY50/FCY50R/FCY50S | ||
| Performance | Payload | 5000kg |
| Operating weight | 3050kg | |
| Hopper capacity | 2.5m3 | |
| Max traction force | 45KN | |
| Maximum turning radius (outside of bucket) | 4850mm | |
| Maximum turning radius (outside of tire) | 4375mm | |
| Wheel base | 1505mm | |
| Dimensions (LxWxH) | 5050x1800x2760mm | |
| Max grade ability | 21° | |
| Engine | Model | Weichai Huafeng 4102 |
| Type | Diesel 4 stroke engine, 4-cylinder incline, direct fuel injection, water cooled | |
| Power | 47KW | |
| Max. torque | 270(N.M) | |
| Transmission system | Gearbox | infinitely variable speeds |
| Clutch | Dry friction type | |
| Hydraulic Torque Converter | 2 Forward and 2 reverse gears | |
| Maximum speed | 24km/hr | |
| Front and rear drive axle | Four-wheel drive, fixed front axle, | |
| swinging rear axle (+, - 11°) | ||
| Steering system | Type | Fully hydraulic hinged frame, load sensing |
| Steering angle (left and right) | FCY50:35° to the left and right | |
| FCY50R:90° to the left and right | ||
| Working hydraulic system | Working hydraulic system pressure | 160(kgf/c m²) |
| Control method | Mechanical | |
| Braking system | service brake | Air cap oil brake |
| Parking and emergency braking | Flexible shaft controlled internal expansion shoe type | |
| Tire | Specification | 14- 17.5 |
| Oil capacity | Fuel tank capacity | 60L |
| Hydraulic system capacity | 60L | |
| SPECIFICATIONS OF FCY60/FCY60R | ||
| Parameters | Bucket capacity | 2.8m³ |
| Rated load capacity | 6000kg | |
| Operating weight | 3050kg | |
| Largest traction | 45KN | |
| Maximum climbing ability | 21° | |
| Maximum turning radius (outside of bucket) | 4850mm | |
| Maximum turning radius (outside of tire) | 4375mm | |
| Wheelbase | 1505mm | |
| Standard model dimensions: LxWxH | 5100x1800x2760mm/4650x1800x2770mm | |
| Engine | Model | Weichai Huafeng 4102/CUMMINS 4BT3.9-C100 |
| Type | In-line, vertical, four-stroke | |
| Rated power | 47kw/75kw | |
| Maximum torque | 270(N.M) | |
| Transmission system | Gearbox | Continuously variable speed |
| Clutch | Dry friction | |
| Gear position | 2 forward gears and 2 reverse gears | |
| Maximum speed | 24km/h | |
| Front and rear drive axle | Four-wheel drive, fixed front axle, swinging rear axle (+, -11°) | |
| Steering system | Type | Fully hydraulic hinged frame, load sensing |
| Steering angle (left and right) | 35°±1° to the left and right | |
| Working hydraulic system | Working hydraulic system pressure | 160(kgf/cm²) |
| Control method | Mechanical | |
| Braking system | Service brake | Air cap oil brake |
| Parking and emergency braking | Flexible shaft controlled internal expansion shoe type | |
| Tyre | Specification | 14-17.5 |
| Oil capacity | Fuel tank capacity | 60L |
| Hydraulic system capacity | 60L | |
| MAIN SPECIFICATIONS OF FCY70/FCY70R/FCY70C | ||
| General | Payload | 7000kg |
| Operating weight | 4550 kg | |
| Hopper capacity | 3.5 m3 | |
| Maximum speed | 25 km/h | |
| Handbrake available on grade | 18% | |
| Max grade ability | 251% | |
| Distance of road after brake | ≤2.5m with load and speed 10km/h | |
| Minimum turn radius | 4 m | |
| Ground clearance | 248 mm | |
| Noise level | ≤102 db(A) | |
| Loading discharge angle | 48.4° | |
| Time of discharge | 6s | |
| Hydraulic pressure | 16 Mpa | |
| Wheel base | 2200 mm | |
| Wheel tread | 1580 mm | |
| Engine Model | Yuchai 60kw engine | |
| Dimensions (LxWxH) | 5250x2250x2700 mm | |
| Tyre | 16/70-20 | |
| Engine | Model/Maker | 4108 |
| Type | Diesel 4 stroke engine, 4-cylinder incline, direct fuel injection, water cooled | |
| Bore x stroke piston | 100 x 105 mm | |
| Power | 60KW | |
| Speed | 2400 R/Min | |
| Max t | 120@2100v/p | |
| Weight | 350 kg | |
| Drive System | Clutch | Single disc, dry type, constant. |
| Diameter | 254 mm | |
| Transmission: | Hydraulic type | |
| Drive shaft: | Tubular-type, open-type, rigid needle-bearing universal joint | |
| Driving axle: | Main drive type: single-stage hyperbolical bevel gear dive | |
| Final driving | full floating | |
| Different: | hyperbolical bevel gear dive | |
| Frame | Frame: | Channel steel welding type, two-section articulated connection |
| Tire: | 16/70-20 | |
| wheel ring: | 9.75H | |
| Steering system | Type | Control by wheel, full hydraulic system, two cylinders double acting. |
| Angle steering each direction | ± 300 | |
| Bake system | Operating brake | Hydraulic shoe system, four wheel mounted. |
| Handbrake | mechanically-pirated central sport-type disc | |
| Electric system | Battery | 24V model 6-QA-150 |
| Starter | QD1315D | |
| Generator 12V | JF1315D | |
| Regular | FT111 | |
Founded in 2006, HENAN ULIKE INDUSTRY Co., Ltd. is a top package equipment solution provider in China, especially for Commercial Vehicle, Engineering Machinery, construction machinery, agricultural machinery, parts and so on
We Ulike industry are always committed to offer our customers high quality products with reliable performance, competitive price and comprehensive services, to ensure every engineering project to be run smoothly on schedule. With over Fifteen years' experience in the field of Commercial Vehicle, Engineering Machinery, construction machinery, agricultural machinery and accompanying to fulfill strictly ISO 9001: 2008 standard, we had established and have been consistently keeping good business relationship with many general contractors, civil engineering firms and construction companies throughout the world.
We Ulike industry participated as package equipment provider previously include airport projects in Africa, power plant projects in Middle East, dredging projects in South America, highway projects in Oceania, rural and municipal road projects in Southeast Asia, and we are still achieving more and more projects at present. To provide reliable products with quick delivery time, to make prompt reaction for spare parts and after-sales services, to visit the users field regularly for local training and maintenance, Ulike industry has been often praised by our customers and has taken great reputation as a trustworthy project partner. Ulike Inductry believe in combining our own achievement together with our customer benefits. Open communication, effective planning and elaborative preparation always commit us to execute and deliver our promises for our customers all over the world.
| Before-Sale | After-Sale |
| 1. Airport pickup, Booking hotel. | 1. Visiting the famous scenic spots in zhengzhou. |
| 2. Visiting our company yard, Enjoying Free test drive. | 2. 1-Year warranty for All the equipments |
| 3. Different machines to compare with each other. | 3. A lifetime of parts and technical support. |
| 4. Interpreting mechanical configuration information in detailed. | 4. Fast parts deliver and quick reply for any feedback . |
1. Who are we?
Ulike industry is an international trade company established in 2006 and located in zhengzhou city, the center of china.Our company is one of the most powerful and potential commercial vehicles, used engineering equipment & construction Machinery suppliers in China, which has abundant experiences in exporting the machinery to the overseas customers. We win a high admiration and is widely trusted in Africa, Middle East, West Asia, South East and so on! The most important thing is that we have ability and would like to provide you high-quality products at competitve price all the time.
2. How can we guarantee quality?
Make contract with customer.
Accept visting our yard all the time.
According to the customers request to do certificate.
3. What is your delivery time?
A: The delivery time is within 15 working days.
4. What is the payment term?
A: Normally we accept 30% deposit by TT for production, 70% balance by TT before shipping. Also can be the terms according your requirements
Currency: USA.EURO.CNY.
5. Why choose us?
More than 15 years exporting experience with Asia, Middle East, South America and Australia all around the world. high-quality resources and channels provide the most cost-effective products, and 24 hours' service.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}